Special Functions - Kuppersbusch KI6870.0SR Instrucciones De Uso

Fig. 13
limiting menu.
Every time the power level of a hotplate
calculate the total power the hob is
generating. If you have reached the
allow you to increase the power level of
that hotplate. The hob will beep and the
power indicator (3) will blink at the level
that cannot be exceeded. If you wish to
power of the other hotplates. Sometimes
it will not be enough to lower another
by a single level as this depends on the
power of each hotplate and the level it
is set at. It is possible that to raise the
level of a hotplate that of several smaller
ones must be turned down.
If you use the quick switch-on at
maximum power function and the said
the hotplate will be set to the maximum
possible level. The hob will beep and
the said power value will blink twice on
the indicator (3).

Special functions:

CHEF
These functions have pre-allocated
obtaining excellent results as the
temperature of the pan is controlled
continuously by sensors. When the
target temperature for the function
maintained without needing to change
the power level.
The Chef functions operate correctly
with pans with the same ferromagnetic
area on the base of the pan as the
for high temperature functions (above
base (preferably "sandwich" type) as
Fig. 8
Fig. 14
To ensure the correct operation of
pan and the cooking zone are not hot
at the start of the process.
Further information about suitable
etc.) is given on the Küppersbusch
web page.
These functions require
that the bottom of the vessel used
covers the two ( ) of the cooking
Fig.9
The Touch Control has special
features that help the user to cook
through the CHEF sensor
To activate a special feature on a zone:
1
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the CHEF sensor
(16). The sequentially successive
presses will go over all the Cooking
functions available in each zone
one by one. These functions
will show the activation with the
(26).
If you want to cancel a special active
related zone to select it. The decimal
point (4) of the power indicator (3) will
(2) cursor in the position ''0'' .
KEEP WARM FUNCTION
This function sets an automatic
power control suitable for keeping the
cooked food hot.
EN
(16).
51