Publicidad
5. Power on the Device
Click the power button 5 times in 2 seconds to power on or
power off the device.
6. Power Adjustment
GEN PT80 S is using the powerful GTX coil platform, and
the suggested power need to be noticed before start
vaping.
GTX MESH Coils
Suggested Power
7. Start Vaping
Press the power button to enjoy extraordinary vaping
experience.
8. Charge the Battery
After connecting the Type-C cable to the battery, the battery
indicator and remaining charging time will be showed on
the screen.
9. Settings
SYSTEM LOCK/UNLOCK: Press power button 3 times.
PUFF: To clear the puff counter, please press power button
and "-" button;
Flip Screen: To flip the screen direction, please press power
button and "+" button.
Press "+"and "–" buttons together to enter the setting
interface.
VW: Wattage adjustment mode;
VV: Voltage adjustment mode;
SMART VW: The power of device will be adjusted
automatically according to the coils;
DEFAULT: Restore factory settings;
EXIT: Back to main interface.
PROTECTIONS
Protections
USB Input Protection
Low Battery Protection
No Load Protection
Short-circuit Protection The device detects a short circuit.
Overtime Protection
Overheat Protection
4 ENGLISH
GTX 0.15Ω MESH
60-75W
Situation
The USB input voltage is too high.
The battery drops too low.
The device detects no cartridge on
the battery.
Constantly vape for more than 10
seconds.
The device detects an overheated
PCBA.
GTX 0.3Ω MESH
32-45W
Publicidad
