Intended Use; Possible Misuse - Hilti TE 500-A36 Manual De Instrucciones

▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in
a place where it is clearly visible and where there is no risk of fire, at an
adequate distance from flammable materials. Allow the battery to cool
down. If it is still too hot to touch after an hour, the battery is faulty.
Contact Hilti Service.
3 Description
3.1 Product overview
Chuck
@
Function selector switch
;
Lockbutton for sustained op-
=
eration (chiseling only)
Control switch
%
Charge-status and fault indi-
&
cator (Li-ion battery)
Release buttons (also used
(
to activate the charge status
indicator)

3.2 Intended use

The product described is a cordless (battery-powered) breaker with pneu-
matic hammering mechanism. The product designed for light to medium
chiseling work on masonry and surface finishing work on concrete.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these
batteries.

3.2.1 Possible misuse

• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.3 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.4 Service indicator
The product is equipped with a service indicator LED.
8 English
1
)
+
§
/
:
∙
$
Battery
Side handle
On/off switch
Button for half power
Half-power indicator
Service indicator
ON/OFF indicator
2240496
*2240496*