Assembly; Description Of The Appliance; Start Up; Spray Lance With Pressure Regulation (Vario Power) The Working Pressure Can Be Continu - Kärcher K Mini Manual Del Usuario

Description of the Appliance

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Illustrations on Page 2
1 Water connection with integrated sieve
2 Coupling element for water connection
3 Hose coupling
4 High pressure connection
5 Accessory compartment
6 Carrying handle
7 Mains cable with mains plug
8 Cable clip
9 Storage for mains cable
10 Appliance switch „0/OFF" / „I/ON"
11 Trigger gun
12 Lock trigger gun
13 Clamp for high pressure hose
14 Spray lance extension
15 Safety cover
16 Spray lance with pressure regulation
(Vario Power)
The working pressure can be continu-
ously increased from "SOFT" to
"HARD". To adjust the working pres-
sure, release the trigger gun lever and
turn the spray lance to the desired posi-
tion.
17 High pressure hose
* Additionally required
Water supply hose
- Minimum diameter, 1/2 inches (13 mm).
- Minimum length 7.5 m.

Assembly

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Pull out the clamp for the high pressure
hose from the trigger gun.
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.

Start up

 Park the appliance on an even surface.
Illustration
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Check the secure connection by pulling
on the high pressure hose.
 Insert the mains plug into the socket.

Water supply

For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
 Screw the supplied hose coupling on to
the end of your water supply hose.
Note: The supply hose is not included.
 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
English 15