Cleaning And Maintenance - Duronic TB10 Instrucciones De Uso

It is essential to keep your toaster clean so that you can enjoy the best results
every time you use it.
Switch off, unplug and allow the toaster to cool down before cleaning.
Cleaning the Main Body
To clean the toaster, wipe the machine body with a well-wrung damp cloth. Dry
with a dry cloth.
Cleaning the Crumb Tray
Pull out crumb tray at the bottom of the toaster and empty it. If the toaster is used
frequently, accumulated bread crumbs should be removed at least once a week.
Make sure the crumb tray is completely closed before using the toaster again.
Cleaning the Glass Panel
The Inner Glass Panel(8) may require occasional cleaning.
1. Disconnect the toaster from the plug socket and let it cool down completely.
2. Lay the toaster on its back.
3. Slide the Glass Panel Latch(9) to the "OPEN" position to unlock and slide out
the Inner Glass Panel from the bottom of the toaster.
4. Wash Glass Panel(8) in warm soapy water, rinse and dry thoroughly.
5. Slide the Glass Panel back into the bottom of the toaster and slide the Latch
to the "LOCK" position to secure it back in place.
Note: the toaster will not operate if the Inner Glass Panel is not fitted and locked
in correctly.
The Heating Tubes
The heating tubes should not be touched or wiped or cleaned in any way as
this will damage them. If any crumbs get lodged around them, gently shake the
toaster and the crumbs should drop into the Crumb Tray.

Cleaning and Maintenance

12