Publicidad
Idiomas disponibles
Idiomas disponibles
Pair up With The Subwoofer
Automatic pairing
Press the
button on the unit or on the
remote control to switch the unit ON.
The subwoofer and soundbar will automatically
pair.
NOTE:
Do not press the Pair button on the
-
subwoofer, except for manual pairing.
-
If the automatic pairing fails, pair the
subwoofer with the main unit manually.
Manual pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1 Power up soundbar by remote control or
touch pad.
2
Power up subwoofer and press Pair key for
Press soundbar SOURCE key or remote
3
control key for 5 seconds until the screen
shows "SUB PAIRING". It is connected when
the LED of subwoofer turns to normal.
NOTE:
•
The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
•
Remove any objects between the subwoofer
and the soundbar.
If the wireless connection fails again, check
(e. g. interference from an electronic device)
or strong interferences and repeat the above
proc
edures.
07 Basic Operation
Standby/ON
socket, the main unit will be in Standby mode.
•
Press the
button on the unit or on the
remote control to switch the unit ON.
•
Press the
button again to switch the unit
back to STANDBY mode.
•
Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto Wake
When AUTO-WAKE function is "on",system
could be wake up from standby mode In HDMI
/eARC/ARC source by CEC or in OPT/COAX
source.
Auto Wake ON/OFF
•
Press remote control play/pause key for 3s, enter
MENU MODE, press NEXT key to select AUTO
WAKE UP MENU, system shows Auto Wake
ON/OFF, press V+ or V-, switch to Auto Wake
ON/OFF. Press remote control play/pause key to
•
When Auto Wake mode switch to on, standby
indicator LED will slow blink after system enter
standby indicator LED will solid light after system
enter standby.
Auto STANDBY
When the system AUTO-STANDBY function is
"ON", the soundbar will turn to STANDYBY mode
if there is no user operation and video/audio
signal input for 15 minutes.
Auto Standby ON/OFF
Press remote control play/pause key for 3s, enter
MENU MODE, press NEXT key to AUTO STANDBY
MENU, system shows Auto Standby ON/OFF, press
V+ or V-, switch to Auto Standby ON/OFF. Press
remote control play/pause key to exist MENU and
•
mains plug from the mains socket.
•
energy when not in use.
14
Publicidad
