Publicidad
Idiomas disponibles
Idiomas disponibles
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using
this unit, check the following points before requesting service.
No power
•
Ensure that the AC cord of the apparatus is
properly connected .
•
Ensure that there is power at the AC outlet.
•
Press standby button to turn the unit on.
Remote control does not work
•
Before you press any playback control button,
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/-)
aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the sensor
on the front of the unit.
No sound
•
Make sure that the unit is not muted. Press
MUTE or VOL+/VOL– button to resume normal
listening.
•
Press
button on the unit or on the remote
control to switch the soundbar to standby
mode. Then press the
the soundbar on.
•
Unplug both the soundbar and the subwoofer
from the mains socket, then plug them again.
Switch on the soundbar.
•
Ensure the audio setting of the input source
(e.g. TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital mode while
using digital (e.g. HDMI, OPTICAL, COAXIAL)
connection.
•
The subwoofer is out of range, please move the
subwoofer closer to the soundbar. Make sure
the subwoofer is within 5 m of the soundbar
(the closer the better).
•
The soundbar may have lost connection with
the subwoofer. Re-pair the units by following
the steps on the section "Pairing the Wireless
Subwoofer with the Soundbar".
•
The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
device is not muted.
14 Troubleshooting
button again to switch
this unit on my Bluetooth device for
Bluetooth pairing
•
Ensure the Bluetooth function is activated on
your Bluetooth device.
•
Ensure you have paired the unit with your
Bluetooth device.
one of the ERPII standard require-
ment for saving power
•
When the unit's external input signal
automatically in 15 minutes. Please increase
the volume level of your external device.
The subwoofer is idle or the indicator
of subwoofer do not light up.
•
The subwoofer is idle when it is not connected
to soundbar over 1 minute.
Please disconnect the AC power and power up
again after 5 minutes .
18
Publicidad
