Publicidad
a. Camera
b. Receiver
c. 1600 mAh rechargeable Lithium-Polymer battery
a
Problem
No sound and no image on
the receiver
Continuous transmission
Out-of-range alarm
permanently activated
The image on the screen is
breaking up
The 'signal loss' image is displayed
The image on the screen freezes
or appears in black and white
Range too small
• Frequency: 2400 MHz ~ 2485 MHz
• Maximum output pow. Camera: 20 dBm (EIRP)
• Nominal input values: 100 – 240 V AC, 50/60 Hz, 0.2 A
• Nominal output values: 5 V - 1 000 mA
• Battery: Li-Ion Polymer 3,7 V / 1600 mAh
6
STANDARD ACCESSORIES
b
TROUBLESHOOTING TABLE
Possible causes
• The microphone's sensitivity is too low.
• The power adapter is not properly connected to
the transmitter.
• VOX mode active.
• Battery empty.
• The VOX mode sensitivity is too hig.
• The distance between the camera and the receiver
exceeds the range.
• The range limits have been reached.
• The transmitter or camera is placed next to other
electrical appliances.
• The light intensity in baby's bedroom is too low, night
vision mode is activated.
• Walls/partition walls too thick between the camera
and receiver.
Receiver: 20 dBm (EIRP)
d. USB-Jack cables
e. USB-C cables
f. Quick start guide
c
YOO MASTER 3.5"
d
e
Solutions
• Increase the receiver volum.
• Check the connection.
• Press a button to activate the screen.
• Charge your receiver.
• Reduce the sensitivity of the VOX mode.
• Move the receiver and camera closer together.
• Move the receiver and camera closer together.
• Move away any nearby electrical appliances or move the
camera away from any source of interference.
• Increase the brightness level in baby's bedroom if you
want to switch back to daytime mode.
• Move the camera and receiver.
f
Publicidad
