Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Maintenance
WARNING: Check the condition of the Hose, Housing and Connectors regularly for signs of
damage or soiling. If any defects are found DO NOT use and have any repairs carried out at an
authorised Silverline service centre. Only use genuine spare parts.
Adjusting the spring tension
WARNING: Take care when carrying out any adjustments to the spring tension to prevent
kickback or twisting.
To adjust the tension:
1. Ensure the Hose Reel Housing (12) is secure
2. Use a 10mm spanner (not supplied) to turn the Tensioning Axle (13) clockwise to remove the
spring load from the Spring Tension Safety Pin (15) (Fig. XIII)
3. Remove the Spring Tension Safety Pin
Note: The load of the spring is now on the spanner. DO NOT remove the spanner until adjustment
is complete and the Spring Tension Safety Pin has been reinserted; this will cause the internal reel
spring to uncoil and all tension will be lost.
4. Rotate the Axle using the spanner to adjust the tension (Fig. XIV),
a) Clockwise to increase the tension
b) Anti-clockwise to decrease the tension
Note: DO NOT rotate the Axle more than one full revolution without rechecking the tension.
5. When the desired tension is achieved, align the hole in the Axle with the Reel Housing and insert
the Spring Tension Safety Pin (Fig. XV)
6. The spanner can now safely be removed
7. Secure the Spring Tension Safety Pin in position by bending slightly at both ends
Lubrication
• Lubricate all moving parts with a suitable lubricant spray, at regular intervals
Cleaning
• Keep your product clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the device's service life
• Clean the body of your product with a soft brush, or dry cloth
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
• Air tools should not be disposed of with household waste
• Spray guns may contain traces of solvents and paint residue, and must be recycled accordingly
• Surplus paints, solvents and cleaning solutions must be disposed of according to the
manufacturer's instructions
• Contact your local waste disposal authority for information on the correct way to dispose of air
tools
8
Publicidad
