Setting Up Conductive Garments; Gel Pads On Conductive Garments - NEUROTECH Recovery-Back Manual Del Usuario

5.0 Setting Up Conductive Garments

This section explains how to apply the back garment when using the conductive garments for the first time. Gel pads are
required for use of both the back and abdomen conductive garments. Do not operate these garments without gel pads.

5.1 Gel Pads on Conductive Garments

Back Garment
The inside of the garment has been printed with gel pad placement guides, showing you exactly where to place the four pads.
Step 1: Lay out the Neurotech Recovery - Back on a flat surface with the blue panel with white markings facing you. (Fig. A)
Note: Your Recovery Back is packaged with two different types of gel pads. Be sure to use the oval shaped pads as they are
designed specifically for use on the back.
Step 3: Place the four gel pads, grid patterned side down, firmly on the garment within outlined areas. (Fig. C)
Step 4: Remove the liners from the black side of all four gel pads. Do not throw these liners away as you will need to put them
back on to the gel pads at the end of your session.
9