Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Install the tap handle and connect the tap. Make sure that both ends fit
together perfectly (see figure 1).
3.
Insert the drip tray into the recess provided (see figure 2).
Handle
Tap
4.
Check if the infrared detection LED (as shown in figure 3) on the top left and
right of the inside of the unit's cooling drum is dirty or damaged. If the beer
keg is not inserted in the cooling keg or is removed, the device cannot operate
normally and the code "OP" is displayed on the control panel.
1
Connection for the
beer outlet
3
2
Infrared detection LED
EN
23
Publicidad
