Furrion DV3100 Manual De Instrucciones página 10

Before Operation
Quick Reference Guide
General
Power On/Off
STANDBY
Mute
Selecting a Source
Volume Adjust
Audio Adjustment
Preset EQ Curves
CLOCK SET
LOUD ON/OFF
SPEAKER SELECTION
RESET
9
Press POWER to turn the unit on or enter standby mode. Long press POWER to
turn the unit off.
Press MUTE button on the remote control to mute the audio, "MUTE" will flash
in the display. Press MUTE again to cancel.
Press INPUT MODE button repeatedly to select Tuner, Disc (After inserting a
disc), USB (After inserting a USB storage), BT, AV IN and AUX mode.
Rotating VOL KNOB to adjust volume.
Press VOL KNOB to select between VOL, BAS (without EQ preset), TRE (without
EQ preset), BAL and BEEP. Rotate it to select audio feature.
Press EQ button to select between CINEMA, ROCK CLASSIC, FLAT.
Press and hold CLOCK button on the remote control to enter CLOCK Setup,
rotate VOL KNOB to adjust hour. Press it briefly to minute setting and rotate it to
adjust. Once time is set, the unit will automatically set after a few seconds.
Press and hold LOUD button on the remote control to turn on or off LOUD mode.
Press ZONE 1 or 2 button to select speaker output, "ZONE <1 >" or "ZONE <2>"
will display on the LCD once it is selected.
Press RESET with a cuspidal object to make the unit be reset to factory default
and re-instate the correct functions.
CCD-0005528 | REV DATE: 11.29.22
Operation