Publicidad
Idiomas disponibles
Idiomas disponibles
Advanced Disc, USB Operation
Playback with Speed
During normal playback, press and hold
or
button on the front panel repeatedly
or press and hold
remote control repeatedly to fast backwards
or forwards at the following speeds: x2, x4,
x8, x16, x20, normal.
During speed playback, press PLAY/PAUSE
button to resume normal playback.
Playback with Slow Speed
During playback, press SLOW_FWD button
on the remote control to execute the Slow
Forward function.
With each consecutive pressing of SLOW_
FWD button, the playback speed decreases.
The speed levels in Slow Forward as follows:
x1/2, x1/3, x1/4, x1/5, x1/6,x1/7, normal.
During slow forward, press PLAY/PAUSE
button to resume normal playback.
The function is only for video.
Playback with still frame
If the unit is currently running DVD/VCD disc,
press STEP button on the remote control
consecutively to display the still frame
forward with step by step.
Press PLAY/PAUSE
normal playback.
Playback Repeatedly
ONE/ALL Repeat
1. In the mode of DVD disc playback:
Press RPT button to select REP
CHAPTER, REP TITLE, REP ALL or REP
OFF.
2. In the mode of VCD (PBC OFF)/CD disc
playback:
/
button on the
button to resume
CCD-0005528 | REV DATE: 11.29.22
Press RPT button to select REP ONE, REP
ALL or OFF.
When it is in the state of PBC ON, during
VCD disc playing, the RPT button is not
available.
3. In the mode of MP3/WMA disc playback:
Press RPT button to select REP ONE, REP
DIR, REP ALL or OFF.
A-B Repeat
Press A-B button on the remote control if you
want to repeat a specific segment on a disc
that you define:
1. Press A-B button at a point (A) where
you want it to be the start point of the
repeat segment. Press A-B button again
at a point (B) where you want it to be the
terminal point of the repeat segment.
Then it will play the segment repeatedly.
2. To cancel A-B repeat mode and resume
normal playback, press A-B button for the
third time.
Note:
During DVD/VCD/MP3/WMA/CD playback,
points A and B must be within the same
track.
Playback from a specified
chapter/track or a specified time
1. When playing DVD discs, press SEARCH
button on the remote control to display
an interface and highlight the title item,
then use the number buttons to input
the serial number of the title; use the
direction buttons to highlight the chapter
item, then use the number buttons to
input the serial number of the chapter;
finally press OK or PLAY/PAUSE
button to play the selected chapter.
2. When playing VCD/MP3/WMA/CD
discs, press SEARCH button on the
remote control to display an interface
and highlight the track item, then use
the number buttons to input the serial
20
Publicidad
Solución de problemas
