Publicidad
Idiomas disponibles
Idiomas disponibles
-39℃～ 60℃ (-38.2 ℉～ 140 ℉ ).
· After determine the MAX temperature value, press the button
for another time, to move to MIN temperature setup mode.
· Press the button
or
temperature value. The default of the MIN temperature in INDOOR
section is -10 ℃ (14 ℉ ), setting range is from -10 ℃ ～ 59 ℃ (14 ℉
～ 138.2 ℉ ). The default of the MIN temperature in SENSOR1/
SENSOR2 section is -40 ℃ (-40 ℉ ), setting range is from -40 ℃ ～
59℃ (-40 ℉ ～ 138.2 ℉ ).
· After determine the MIN temperature, press the button
/
/
to confirm the alarm temperature value and
exit the setting mode, returning to the normal mode.
· During the setup mode, if there is no any operation for over 8
seconds, the thermometer will automatically exit the setup mode
and return to the normal display mode.
· No matter whether the Alarm is on or not, if you set up the Alarm
temperature value, the Alarm will be automatically turned on.
3. INDOOR/ SENSOR1/ SENSOR2 Alarm Mode Description
· Every time when you turn on the alarm mode, in the first 10
minutes, no matter whether the temperature reaches the MAX/ MIN
temperature you have set or not, the alarm will not be activated and
sounding.
· When you turn on the alarm mode for 10 Minutes, the system
will enter into temperature comparison mode with the MAX/ MIN
temperature you have set before. This time, if the temperature
reaches the MAX/ MIN temperature, the base will keep sounding.
· Only press the Alarm Button
turn off the alarm. Press other buttons will not turn it off.
· INDOOR alarm sound rhythm: Sound a'BI' for every second
until you press the button
· SENSOR1 alarm sound rhythm: Sound a'BI BI' for every second
until you press the button
· SENSOR2 alarm sound rhythm: Sound a'BI BI BI BI' for every
second until you press the button
to increase or decrease the
/
/
can you
to stop.
to stop.
to stop.
4. MAX/ MIN Temperature Memory Record
· When temperature is changing, compared with the previous MAX/
MIN value, the latest MAX/ MIN value will be automatically updated
and displayed.
· In normal mode, press the CLEAR button once to clear the MAX/
MIN value directly.
5. Temperature Trend Indication
· 3 groups of temperature trend indication: Real-time detection,
if the deviation of the detected temperature from the current
temperature is greater than 1 degree, the temperature trend
indicator displays a rising sign, if the deviation of the detected
temperature from the current temperature is less than 1 degree, the
indicator displays Decline sign. If the detected temperature is within
1 degree compared with the current temperature within 1 hour, the
indicator shows a parallel sign.
6. Low Power Indication of Outdoor Sensors
· When the outdoor sensors detects that the battery voltage is lower
than 2.6V, the base will receive the signal and display the low power
symbol of the corresponding channel.
Ⅳ . Specification of the Thermometer
1. RF (Radio frequency) Reception Mode
· After putting batteries into the base, it will show all the sections for
1 seconds and the INDOOR temperature. Then enters RF reception
mode for 3 minutes. Receive the signal and exit the RF mode/ Not
receive the signal and exit the mode after 3 minutes. During RF
reception, the SEONSOR channels temperature display: flashes at a
frequency of 1HZ per second.
· Press simultaneously
CLEAR， compulsively enter RF reception mode.
· Supporting sensors：CJ-5516TX1,CJ-5516TX2
· SENSOR1 temperature synchronization period: 57S
· SENSOR2 temperature synchronization period: 67S
· The base can receive the signal well from the sensors within 100m/
109.36yd. without obstacle.
+ CLEAR/
+ CLEAR/
+
Publicidad
