Hikmicro CHEETAH Serie Guia De Inicio Rapido página 7

 The battery type is 18650 with the protection board. The battery size
is 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery
capacity is 3200 mA.
 Charge the battery for more than 4 hours before first use.
 To ensure good conductivity, please use the cleaning cloth to clean the
thread of the battery compartment cover if it gets dirty.
3. Install Adapter (Page 3 – C)
Install an adapter if you want to connect a daylight scope to the device.
Steps
1. Make sure the red dot of the adapter align with the red dot of the
eyepiece, and insert the adapter as arrow 1 shows.
2. Rotate the locking ring clockwise (as arrow 2 shows).
Note: Four diameters of adapters are selectable: 38 mm, 40 mm, 50 mm,
and 62 mm.
4. Remove Adapter
Steps
1. Rotate only the locking ring counterclockwise, and make sure the
device or other parts of the adapter are not rotated or moved.
2. Plug out the adapter after it is loosen.
5. Charge Device (Page 3 – D)
Before You Start
Please turn on the device and make sure the hotspot function is disabled.
Steps
1. Lift the cover of the type-C interface.
2. Connect the device to the power adapter using a type-C cable to charge
the device.
6. Connect to Mobile App (Page 3 – E)
Search and download HIKMICRO Sight on App Store (iOS System) or
Google Play™ (Android System), or scan the QR code to download and
install the App. After conneting the device to the mobile App, you can
view live view, set parameters, upgrade devices, and access albums on
the App.
5