Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure that the charger is only used by who is familiar
with the instruction manual.
Always check the charger before using it. If the charger
does show damages do not plug it in the socket. This may
cause an electric shock to the user.
If the terminals are dirty, clean them with a dry and clean
cloth.
Use the charger in accordance with the safety instructions.
Not complying with the safety instructions can cause
accidents and serious injury to the user.
When the charger is connected, keep the charging contacts
away from objects made of conductive materials in order to
prevent a short-circuit.
Unplug the charger power cord whenever the charger is not
connected to a battery.
The charger was designed for charging any type of battery.
The charger should only be serviced by the manufacturer's
technical assistance service, or by qualified personnel, with
original spare parts only.
The smart battery charger has several charging modes. It
can be used in 12V STD charging mode for 12V lead acid
batteries, 12V AGM for AGM (Absorbent Glass Mat) batteries,
as well as 6V STD for 6V lead acid and gel batteries. It also
features winter (
) mode for low temperatures.
The voltage tester (
and the battery icon (
There are three icons for anomalies:
▪
The symbol in the left corner means reverse polarity
(
). The charging cables are incorrectly connected.
Switch them;
▪
The middle symbol means faulty battery (
battery should be tested by a qualified technician and
changed if necessary;
▪
The symbol in the right corner means bad connection (
). Check the charger and battery connection.
1. Connect the charger to the battery:
▪
Connect the red cable to the battery positive terminal
(+);
▪
Connect the negative cable to the battery negative
terminal (-).
2. Connect the charger to a 230V socket;
3. Push the "MODE" button, to choose the appropriate
charging mode for your battery;
4. After a few seconds, the battery automatically starts
charging;
5. When the battery is fully charged, the display shows
"FUL" and the charger will switch to maintenance mode.
) shows the charging voltage
) shows the charging status.
). The
Publicidad
