Himox -H10 Manual Del Usuario página 13

3. When appearing "Successfully added 1 device", it means the connection is
completed and your device will be listed in your APP list.
Notice:If the Wi-Fi indicator turns off and does not turn on automatically when
connecting in EZ mode, it must be failed to connect.
Add Devices in AP Mode
1. If failed in EZ Mode, you could also add your air purifier in AP Mode.
2. Press the Timer/Wi-Fi button for more than 5 seconds until hearing "beep" and
the Wi-Fi indicator light beginning to flash quickly, then press the Timer/Wi-Fi
button for another 5 seconds until hearing "beep" and the indicator light
beginning to flash slowly, which means the device is already for configuration in
the AP Mode.
3. Tap "+" on the right top of the APP. Select the device type and tap it. After the
step of entering the network code, select "AP Mode"on the right top of the APP.
12