Publicidad
Idiomas disponibles
Idiomas disponibles
•
Disconnect the charger from
the outlet before attempting any
cleaning. This will reduce the
risk of electric shock. Removing
the battery pack will not reduce
this risk.
•
Never recharger a fully charged
battery cartridge.
•
Do not charge non-rechargeable
batteries.
INTENDED USE
The machine is intended to drill
holes on wood, concrete or metal.
When drill the hole in the steel, let
the machine in low speed (not full
speed). Thus it can improve the
drilling efficiency.
And it can be used to tighten and
loosen screws, bolts or nuts within
the respective range of dimension.
LIST OF MAIN PART
1. Drill and screwer
2. Battery
3. Switch
4. Rotation selector
5. Drillchuck
6. Torque selector
7. Battery charger
8. Battery load indicator
TECHNICAL SPECIFICATIONS
Battery
Voltage
Speed
Weight
Max torque
NOISE/VIBRATION INFORMATION
Measured sound values determined
according to EN 60745.
Wear hearing protection!
LI-ION
20V
0-440 /
0-1650rpm
1.3 Kg
42 Nm
10
Publicidad
