Publicidad
Idiomas disponibles
Idiomas disponibles
Complete Installation
ONLY FOR RECIRCULATING VERSION
(Using Recirculating Kit model KIT02665)
Air deflector installation
• Assemble the air deflector with the upper horizontal support
with 2 assembly screws.
A
A. Air deflector
B. Assembly screws
• Measure from the bottom of the air deflector to the bottom of
the hood outlet, as shown.
A. Dimension to measure
• Cut the duct at the measured size.
• Slip the duct onto the bottom of the deflector.
• Place the duct over the exhaust outlet from the hood.
• Use duct tape to seal the deflector and at the exhaust outlet
from the hood.
• The charcoal filters needs to be clipped on the motor as the
image below shown.
B
Duct cover installation (both ducted and non ducted versions)
• Attach the upper duct covers using 6 - 3.5x6.5 mm screws.
NOTE: For non-ducted (recirculating) installation, the
slotted holes in the upper duct covers will be visible when
assembled. For ducted installations, the slotted holes will be
A
hidden down inside the lower duct covers.
9
Publicidad
