Connection Instruction - Oversteel TOMBAC Manual Del Usuario

EN

Connection instruction

Connecting to the SWITCH Console via wireless
A. Connecting to an SWITCH console for the first time:
Power on the SWITCH Console, on the main interface of the console click (by using your finger)
"Controllers" "Change Grip/Order" to come to pairing mode interface; press "HOME" key and
hold for 4s to power a controller on, four LEDs in the controller start blinking slowly and circularly
then blinking quickly and circularly after 4 seconds, when one (or more) of the four LEDs in solid
bright, it means that the controller is paired with the console successfully; Press "B" key to return
to the main interface of the console.
B. Connecting to a paired the SWITCH console:
If a controller was paired with the SWITCH console ever before, just press the "HOME" key
shortly to power the controller on, the controller will be connected to the console automatically
again.
C. Connecting controller back to SWITCH console:
A. If a controller is in sleeping mode, press the "HOME" key shortly to wake it up, it will be
connected to the console again automatically.
B. If the SWITCH console is in sleeping mode, first press the power button of the console to wake
the console up then shortly press the "HOME" key of the controller to connect it back to the
console (If the SWITCH console is in sleeping mode, the console can't be woken up by directly
pressing any key of the controller).
Connecting to SWITCH Console via USB cable
On the main interface of the SWITCH console, click "Settings" "Controllers and sensors" + "Pro
Controller Wired Communication" + "ON" to open Pro controller wired connection; Connect a
controller to the USB port of the console holder through a USB cable, LED 4 in the controller
starts blinking slowly then LED 1 in the controller will be blinking slowly after the controller is
connected to the console.
6