Publicidad
M430
Bundle
ENGLISH
Important information
The M430 bundle contains one M400 base station with
Ethernet cable and one M30 handset with charger and
power adapter.
Setting up, configuring, and using base
station and handset
For information on setting up, configuring, and using the
base station and the handset, please refer to the user
manuals listed on the M-series product pages at www.snom.
com.
Intended use
The handset is designed for professional use. The base
is designed for professional use with a Snom M-series
handset. Any other use is considered unintended use. Any
modification or reconstruction not described in the user
manual is considered unintended use.
Safety precautions
Please read these precautions and the instructions on how
to set up and use the phone thoroughly before using the
phone. Save this guide and do not give the phone to third
parties without it.
Charger, power supplies/adapters, rechargeable
batteries
• Base station M400
The M400 is provided with both power and the network
connection via PoE (Power over Ethernet), IEEE 802.3,
Class 2, 10/100 Base-T interface. If PoE is not available, a
power adapter can be ordered separately:
◦ Mass Power, model NBS12E050200UV, Snom PN
00004570
◦ Rongweixin, model R122-0502000ID, Snom PN
00004571
Use only a power supply expressly recommended by
Snom. Other power power supplies may damage or even
destroy the device.
• M30 handset charger, rechargeable batteries
Use only the rechargable battery delivered with the
device or expressly recommended by Snom. In case of
malfunction, contact your dealer or Snom-authorized
service personnel. Use only the power supply delivered
with the device or a power supply expressly recommended
by Snom. Other power supplies may damage or even
destroy the device.
6
• Power M30 handset charger: SMPS power adapter Ten
Pao, input 100-240 VAC, output 5V DC 1000 mA (included
in delivery), USB type A jack.
◦ EU: model S005CAV0500100
◦ U.S.: model S005CAU0500100S
◦ AU: model S005CAS0500100
◦ UK: model S005CAB0500100
Placement of base, handset charger, cables, and
cords
• Warning: Power adaptors shall be installed near the
equipment and shall be easily accessible.
• The socket outlet for the power adaptor must be near the
equipment and easily accessible.
• Mount the device only at heights not exceeding 2m.
• Avoid placing the devices' cords where people may trip
over them. Avoid placing the cords where they may be
exposed to mechanical pressure as this may damage
it. If the power supply cord or the plug is damaged,
disconnect the device and contact qualified service
personnel.
• Charger, power adapter, and cord are for indoor
installation only. Not for outdoor installation!
• The operational temperature for base station and handset
is between -10°C and + 50°C (14°F and 122°F); the
charging temperature for the handset is between +5°C
and +45°C (41°F and 113°F).
• Do not install product in rooms with high humidity
(for example, in bathrooms, laundry rooms, damp
basements). Do not immerse product in water and do not
spill or pour liquids of any kind onto or into any parts of it.
• Do not install product in surroundings at risk for
explosions and do not use the handset in such
surroundings (paint shops, for example). Do not use the
phone if you smell gas or other potentially explosive
fumes!
• I nstall the base at a minimum distance of 100 cm (39") to
persons and animals.
• Medical devices might be adversely affected. Please
consider the technical ramifications when installing the
devices in a doctor's office, for example.
• Warning: The handset contains a magnet, and its
earpiece may attract small dangerous objects such as
needles or pins. Please ensure before each use that no
such objects are present.
• FOR THE USA: Do not use near medical equipment or if
you have a pacemaker.
If you have an implanted pacemaker
• Do not use if you have an implanted pacemaker unless
the pacemaker manufacturer's directions expressly
permit the use of devices emitting pulsating radio
Quick Installation Guide
2022006
Publicidad
