Publicidad
Idiomas disponibles
Idiomas disponibles
Parts supplied
Removing the packaging
I
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
I
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood assembly with blower and LED lamps already installed.
• Hardware bag with:
Part
Hood assembly
Rectangular duct 31⁄4" x 10" (8.3 x 25.4 cm)
Torx 20 adapter
10x50 mm wall anchors
8x40 mm wall anchors
Security screws 5.4x75 mm
Security screws 5x45 mm
Security screws 4.5x13 mm
Mounting screws 4x8 mm
6.4x18 mm washers
Tools/Materials required
• Level
• Drill with 1¼" (3.0 cm),
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Metal snips
Qty
• Screwdriver
Flat-blade
Phillips screwdrive
1
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
1
• Metal vent system
Parts not supplied
Optional Accessories
1
CFM Reduction Kit
6
Recirculating Kit
6
6
6
4
4
2
3
⁄
" (3.0 mm), and
⁄
" (4,8 mm)
1
1
8
16
r
Kit
# Part
KIT02748
KIT02770
Publicidad
