Faq - Proscenic A9 Manual Del Usuario

FAQ

The following table lists possible questions and steps to
address them. Please contact Customer service if you cannot
fi nd an answer to your question below.
Issue Possible Reason
Filter cover not installed cor-
Bottom cover not locked in
Unit does
not work
Power supply for plug
Deformed power plug or wire
The machine doesn't turn on
Motor is not working
Unit on uneven ground
Fan does
not work
Loose or foreign particles in-
Filter packaging not removed
The motor is loose
Filters need to be replaced
Air intake/outlet blocked
Filter packaging not removed
Perfor-
mance
Not enough space surrounding
Issues
Lack of fi lter or fi lter is not
properly installed
Coverage area questions
10
rectly
Check that bottom cover is turned into locked posi-
place
side
Replace with an original Proscenic A9 fi lter for bet-
Ensure 10 in. distance between sides of air intake
and that distance to air outlet is not less than 8 in.
unit
Make sure all fi lters are placed in order in accor-
Check whether room area surpasses coverage area
Possible Solution
Remove bottom cover and re-install
tion
Pull out plug and plug it back into unit
Contact customer service
Plug it in and turn on
Contact customer service
Move to fl at surface
Contact customer service
Remove plastic bag from fi lter
Contact customer service
ter performance
Contact customer service
Remove plastic bag from fi lter
dance to instructions
estimates