MADISON MAD-NASH60 Manual De Uso página 3

MAD-NASH60
14. Mic priority: Press to reduce the volume of all other input sources while you are talking into the micro-
phone
15. Power ON/OFF switch
16. Display
17. 9V�� input to charge the built-in battery
BLUETOOTH OPERATION
Keep the power button (15) pressed to turn the speaker on. "bLUE" is slowly flashing on the display (16) to indi-
cate that the speaker is on. Keep the power button (15) pressed to turn the speaker off. The display will always
show "bLUE" when the speaker is connected to a Bluetooth device.
Turn on the Bluetooth function on your external Bluetooth device and select "NASH" in the list of found devices.
If a password is required, enter "0000" . After successful pairing, you will hear a tone.
AUX/LINE OPERATION
To use the speaker with an AUX/LINE source, plug one connector of the 3.5mm audio cable into the 3.5mm
auxiliary audio input jack (3) on the speaker. Plug the other connector into the headphone jack of your me-
dia-playing device. Used the MODE button (8) to switch into LINE mode. The display will show "LINE". Playback
is controlled via the connected device.
USB OPERATION
Insert a USB device into USB port (1) to play the music stored on the drive. The play will start automatically.
MICRO-SD OPERATION
Insert a microSD card into the TF port (2) to play music stored on the drive. The play will start automatically.
FUNCTIONS OF THE MENU BUTTON (7)
Press the MENU (7) button and rotate the volume knob (6) to control the following functions in sequence:
Press 1x: T= Treble
Press 2x: b= Bass
Press 3x: n= Mic vol
Press 4x: E= MIC Echo
Press 5x: d= MIC Delay
Press 6x: gt=Guitar Treble
Press 7x: U= Music vol
MODE BUTTON (8)
Press this button to toggle between modes: BT, AUX, USB, TF
MIC PRI (14)
Short press this button to activate the microphone priority function in BT, USB, TF mode. The display will show
"n-ON". Press again to cancel this function. The display will show "n-OF". When this function is activated, the
music will stop when you speak into the microphone and resume when your stop speaking.
REC (9)
This function is only available in USB/TF mode. You can only record the sound of the microphone. Keep the
button pressed for about 3 seconds to start recording. Short press the REC button to stop recording. Short press
again to listen to your record.
NEXT TRACK (10)
Short press the button (10) to move forward in steps through the playlist in BT, USB and TF mode. Keep the
button pressed to browse fast forward through the music in USB and TF mode.
PREVIOUS TRACK (12)
Short press this button (12) to move back through the playlist in BT, USB and TF mode. Long press this button
to browse quickly backwards through the tracks in USB and TF mode.
PLAY/PAUSE / TWS (11)
Short press this button to play/pause (11) the music in BT, AUX, USB, TF mode. Long press this button to enter
into TWS mode. When TWS pairing is successful, you can find just one pairing name then select it and connec-
Code: 10-5573MA 3