Tws Function - MADISON MAD-NASH60 Manual De Uso

ted, then you can control by your device, you can long press one TWS button of one unit to stop TWS of two
unit.

TWS FUNCTION

1. Keep the PLAY/PAUSE/TWS button (11) pressed to enter into TWS mode. The displays on both speakers will
show "t-ON" when TWS pairing was successful.
2. Activate the Bluetooth function on your smartphone and select "NASH" in the list of found devices.
3. "Blue" is flashing slowly on the display of one of the speakers and the display of the other speaker will show
"BT01".
4. Now you can control the speakers via your Bluetooth device.
5. To cancel the TWS function, keep the TWS button pressed on one of the speakers. The display will show
"t-OF".
Please note: If you add a second NASH speaker for the first time, please delete the speaker first from your Bluetooth devices, make the TWS
pairing and then search for NASH on your smartphone.
LED SWITCH (13)
Short press to cycle through the various light modes. Keep the button pressed to turn on/off the light.
TROUBLE SHOOTING
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
PROBLEM
No sound when
power on
Distorted sound
No sound from
Karaoke
No sound from MP3
source
SPECIFICATIONS
Input voltage ........................................................................................ 9V�� 1.5A via supplied mains adaptor
Built-in battery ................................................................................................... Lithium-ion 7.4V�� 3600mA h
Consumption ............................................................................................................................................ 40W
RMS/peak power ............................................................................................................................50W/600W
BT freq. band .......................................................................................................................... 2402-2480MHz
Max RF emission power .................................................................................................................... 2.37dBm
Dimensions ..................................................................................................................... 260 x 270 x 610mm
Net weight ............................................................................................................................................. 5.6kg
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
4
POSSIBLE CAUSE
1. No input source
2. Volume set to minimum
1. Master volume is set too high
2. Damaged speaker
1. Microphone plug is not firmly inserted
2. The microphone is not switched on
3. Mic volume set to the minimum
1. Unsupported file format
2. USB/TF source not properly inserted
SOLUTION
1. Connect an input source
2. Set the volume to an appropriate level
1. Reduce the volume
2. Check if the speaker is damaged
1. Insert the mic firmly into the socket
2. Switch the microphone on
3. Increase the microphone volume
1. Change into MP3 format
2. Insert the USB/TF source properly