Publicidad
Idiomas disponibles
Idiomas disponibles
-
Slightly adjust the volume controls with a screwdriver until the desired volume is reached and check
the coverage in the entire area. The shape of these controls and their position on the amplifi er prevents
accidental misadjustments that may cause injury or discomfort to users.
-
IMPORTANT :
-
Switch off the amplifi er whenever you are not going to use it.
-
Periodically check the correct operation of the equipment.
TECHNICAL SPECIFICATIONS
FEATURES
FUNCTIONS
POWER
FREQUENCY
RESPONSE
DISTORSION
PROTECTIONS
CONTROLES
INPUTS
OUTPUTS
LOOP
CURRENT
POWER SUPPLY
DIMENSIONS
ACCESSORIES
Condenser
microphone
AUDIFON-V
Tele-coil hearing aid loop amplifi er.
Complete kit for installation on counter and or teller window.
1.2 m
counter loop
2
Extendable up to 20 m
2
LED operation indicators.
Countertop or under-counter installation.
5 W RMS, THD 2.5%
35 - 20 kHz, -10 dBA
THD+N <0'2%, 1 kHz, 1W
Overheating and overloading
On/off
Microphone and AUX volume.
Output volume.
1 clip-on microphone, 3.5 mm TS jack, 1.5 mV, Phantom 5 V 1 mA
1 AUX, 3.5 mm TRS jack, 250 mV
1 Loop, Euroblock
Counter loop 1.2 m
included.
2
For loop extention use recommended cable 0.22 - 1.5 mm², máx. length 70m, impedance
0.5 - 3 Ohm
2 A
12 V DC, 1 A with adapter included
Power consumption: 10 W
Standby power consumption: 0.5 W
Amplifi er: 155 x 35 x 35 x 75 mm depth
Clip-on microphone cable: 1.40 m
70 x 70 cm loop cable (1.2 m
Unidirectional clip-on microphone
Loop cable
Adhesive T
Induction
(using a 4.5 x 4.5 m loop in 4 loops)
coverage) with 1.8 m extension cable
2
- 5 -
loop
EN
Publicidad
