Publicidad
How to get to the main menu
Press the
and
button at the same
time and hold them for 2 seconds. The
main menu will appear.
How to navigate in the menu and change
settings:
•
Press the
button and jump to the
next menu item, or hold the
for 2 sec to jump to the previous item.
•
Press the
button and change the
settings of the item.
•
Press both buttons for 2 seconds to
save the settings and leave the menu
(not pressing anything for 5 sec does
the same).
Unit headtop setting:
Go to the unit menu (
and
and repeat pressing
until the required
headtop standard appears.
9. Storage
All parts of the CleanAIR® system must be stored at temperatures between -10 °C and 55 °C, with relative air humidity between
20 and 95% Rh.
Batteries will self-discharge during storage. Therefore, it is recommended to charge the battery for 1 hour at least every 3
months. The optimal battery charge level for longer storage is between 50 - 70% of capacity. After longer storage time it is
necessary to repeat 3 charging cycles to reach battery's full capacity.
10. Warranty
The warranty ensures that you will receive a replacement if a product has any manufacturing or material defects that appear
within 12 months of the date of purchase. The same period for batteries is 6 months from the date of purchase. The warranty
claim must be reported to the sales department/retailer. At the same time, proof of purchase must be submitted (i.e. an invoice or
certificate of delivery). The warranty can only be acknowledged if no interventions into the powered respiratory unit and charger
have been made. The warranty does not cover defects caused by the late replacement of filters, or by using a filter which was
damaged by cleaning or being blown through.
The manufacturer strongly recommends to perform periodical inspections in CleanAIR® authorized service center. Inspections
should be done according the local law and at least once in every two years.
11. Certification
Explosion protection sign
Equipment group
(explosive environments outside underground parts of mines)
Category 3 (gaseous atmospheres)
Group IIB (also complies with IIA requirements)
Temperature class, gas (maximum surface temperature 135 ° C)
EPL protection level
Explosion protection sign
Equipment group
(explosive environments outside underground parts of mines)
Category 3 (dusty atmosphere)
Group IIIC (also complies with IIIA and IIIB requirements)
Temperature class, gas (maximum surface temperature 135 ° C)
EPL protection level
12
How to change the filter setting:
Go to the unit menu (
and
for 2 sec) and press
once to get to the next item; repeat pressing
until the required filter standard appears.
Available
How to change the language
languages
To change the language, go to
button
•
English
the menu (
and
•
French
time for 2 seconds) and then to
•
German
the language item* (press the
•
Czech
button four times); press the
button to select the required lan-
•
Norwegian
guage. By not pressing anything
•
Dutch
for 6 seconds your settings will
•
Italian
be confirmed.
•
Spanish
•
Russian
* In order to ease finding "lan-
for 2 sec)
•
Hebrew
guage item" is highlighted by
•
Polish
symbols ">" and "<".
•
Finnish
II 3 G IIB T4 Gc
II 3 G IIB T4 Gc
II 3 D IIIC 135°C Dc
II 3 D IIIC 135°C Dc
12. Technical data
Technical specifications - CA Chemical 2F Plus
Airflow
Display
Weight of unit, including battery
Unit noise
at the same
Battery lifespan
One charging cycle
Belt - waist size
Operating temperature
Operating humidity
Certification
The unit conforms with:
IP64: When switched ON (without any further requirements)
IP65: When switched ON (with the set of spark arresters and pre-filter holders - 50 01 12)
IP68: When switched OFF (with inputs and output closed with decontamination plugs - 51 00 46)
Declaration of Conformity is available at: https://www.clean-air.cz/doc
Notified body for testing CE:
13. List of spare parts
Compatible headtops – see page 6
Compatible spare part/accessories
Product code:
51 00 10
51 00 20
71 00 92
52 00 44.1
51 00 51
51 00 52
51 00 30EUR
51 00 30UK
71 00 60
71 00 86
71 00 60L
71 00 86L
70 00 62F
70 00 62C
70 00 86CA
70 00 86L
70 00 86R
70 00 86RL
52 00 90
51 00 46
51 00 11
51 00 12
120 - 235 l/min
TFT display
1 270 g
55 to 61 dB
Max. 500 recharging cycles
less than 3 hours
up to 1,500 mm
0 to 60 °C
20 to 95% Rh
EN 12941/A2 TH2/TH3; EN 12942/A2 TM2/TM3
Occupational Safety Research Institute, v.v.i.
Jeruzalémská 1283/9, 110 00 Prague 1
Notified body 1024
Description:
Battery CA Chemical 2F, Li-Ion (14,4V / 2,6Ah)
Battery CA Chemical 2F Heavy Duty, Li-Ion (14,4V / 5,2Ah)
Comfort belt Super
Comfort harness
Decomtaminable belt
Decomtaminable harness
Charger Li-Ion 14,4 V - EURO plug
Charger Li-Ion 14,4 V - UK plug
Light flexi hose QuickLOCK - CA40x1/7"
Rubber hose QuickLOCK - CA40x1/7"
QuickLOCK Light flexi hose, extended
QuickLOCK Rubber hose, extended
Hose cover flameproof
Chemically resistant hose proof
Rubber hose CA40x1/7" - CA40x1/7" - mask compatible only
Rubber hose CA40x1/7" - CA40x1/7" straight - 900mm - mask compatible only
Rubber hose CA40x1/7" - CA40x1/7" 90° - mask compatible only
Rubber hose CA40x1/7" - CA40x1/7" 90° - longer - mask compatible only
Flow indicator CA40x1/7"
Set of decontamination plugs 2F
Lithium primary battery CA Chemical 2F
Battery CA Chemical 2F for RDD, Li-Ion 14,4V/2,6Ah
2F Plus
2F Ex
13
Publicidad
