WerkaPro 10084 Manual De Instrucciones Y Mantenimiento página 6

 NEVER lift more than one mower at a time. Never lift more than 400 kg (1100 lbs.).
 The mower and tractor lift should be used in dry conditions only.
 Do not move the mower lift when a load is being lifted.
 Do not stand under the load.
 Always wear a helmet, safety glasses and gloves when operating.
 Make sure that the mower lift is placed on a clean, flat and free surface.
 Do not operate the lawnmower lift in the presence of children.
 The minimum permissible wheel width of the mower is 20cm.
 The maximum permissible width of the mower is 100 cm.
 The minimum permissible distance between the wheels is 60 cm and the maximum is
80 cm.
2. Assembly (in 2 steps) very important
Two operations are necessary to use the tractor lift and mower correctly.
1st operation: The auger must be put in its notch before using the product.
2nd operation: put in place the two anchoring pegs on the ground, the mower lift will not be
able to move during your intervention.
3. Use
 The mower must be stopped before being handled.
 Bring the mower to a standstill near the tractor and mower lift and in order not to damage
the mower and the product, push gently from behind the mower until the wheels are
perfectly between the 2 bars of the wheel support.
 -Make sure the mower is centered on the mower lift.
 When raising or lowering, always hold with both hands. The total lift is achieved after
80 turns of the crank. The maximum lifting height is 80 cm. Do not walk under the
mower when it is raised. Extreme caution should be exercised when mounting the blades
and cleaning the mower deck. The operator is solely responsible for any mishandling or
failure to take proper precautions. When you have completed the operation, it is
advisable to lower the mower and not leave it in the raised position.
 Please observe the direction of rotation: clockwise for lifting and counterclockwise for
lowering.
Additional information for use
4.
Checking before each use
 Check the condition of the auger.
 Make sure the mower is correctly positioned on the wheel support.