Device elements
1 Filter cover
2 Filter dedusting
3 Flat fold filter
4 Handle
5 Suction hose
6 Cable hook, rotating
7 Push handle
8 Suction head lock
9 Impeller
10 Chassis
11 Dirt receptacle
12 Steering roller
13 Button for filter shake off system
14 Suction support
15 Chassis lock
16 Floor nozzle
17 Indicator lamp
18 Socket
19 Main switch
20 Suction pipe
21 Carrying handle
22 Suction head
23 Electrodes
24 Filter frame lock
25 Filter frame
26 Bender
27 Exhaust filter
28 Suction pipe storage
29 Elbow intake
30 Crevice nozzle storage
31 Exhaust air outlet
32 Power cord
33 Nameplate
Start up
Anti-static system
Eco Te Adv only:
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks with attachments with electrical
conductivity included in the delivery.
All manuals and user guides at all-guides.com
Caution
The flat pleated filter must must always be
in place while vacuuming.
–
Inserting the paper filter bag
Illustration
Release and remove the suction head.
Place the paper or fleece filter bag.
Insert and lock the suction head.
Inserting the rubber lips
Illustration
Remove the brush strips.
Install the rubber lips.
Note: The structured side of the rubber lips
must point outwards.
Remove the paper filter bag
–
General
Caution
The flat pleated filter must must always be
in place while vacuuming.
–
–
–
–
2
-
EN
Dry vacuum cleaning
To vacuum fine dust, you can also use
an additional paper filter bag or a fleece
filter bag.
Wet vacuum cleaning
To vacuum wet dirt, first remove the pa-
per or fleece filter bag.
If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if mostly wa-
ter is suctioned from a container it is
recommended not to activate the "man-
ual filter dedusting" function.
If the maximum liquid level is reached
the appliance will turn off automatically.
In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
After the wet vacuuming: Clean the flat
folded filter with the filter cleaning. Clean
the electrodes with a brush. Clean the
container with a damp rag and dry it.
9