Fitting The Plinth - Amica WCB2K60B36.1 Manual De Instrucciones

FITTING THE PLINTH

We recommend the help of at least one other individual throughout this
process. Protect the area beneath the door and plinth with several clean
towels or similar protective means. Do not tilt the appliance further than
45° during this process. Allow the cooler to settle for at least 8 hours
before switching on after tilting.
1. Unscrew and remove the two
screws that are used to fix the
plinth and bottom bracket (Fig.
A).
2. Insert the tabs on the glass
fronted plinth section into the
top slots of the metal plinth, as
per part 1 of Fig. 14. Manoeu-
vre the plinth so that the holes
in the inner lip of the glass
fronted plinth section are lev-
el with the holes in the metal
plinth (2 in Fig, B).
Fig. B
- 23 -
Fig. A