TECshow MADBOX 3-in-1 Manual De Usuario página 4

3. Safety and maintenance
Information
Before delivery, this device has passed strict inspection,
Please follow the user manual strictly for operation, if
this fixture is damaged by improper operation and mis-
take, the fixture will be out of warranty, and manufac-
ture or dealer won't be responsible for it. In case of any
technology change in this manual,we won't advise in
further.
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Damages caused by the disregard of this user man-
ual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
• Once after received this product , please take and
put carefully. And check cautiously that whether the
product was damaged or not during the transporta-
tion, if yes, please not use this fixture and contact
local dealers or manufacturers as soon as possible.
• The applicable temperature for the lighting is below
40°C. Do not use the lighting above the tempera-
ture.ta=40ºc
• The fixture applicable widely, it must keeping clean,
Please do not in overheat or dusty environment use
the device. Do not touching Chemical liquid.
4. Installation
• When install this equipment please make sure there's
no flammable surfaces (decorated things, etc) and
minimum distance of 0.5M from the equipment to the
flammable.
P. 4
MADBOX 3-IN-1
ENGLISH VERSION
• Should be paid attention to the use of this product:
fire, heat, electric shock, loss caused by severe or
fatal injury, in electricity or to read the instructions
before installation, follow the safety instruction and
pay attention to the manual and warning signs on the
equipment, if you have any other questions about
how safe operating equipment, please contact the
dealer or manufacturer as soon as possible.
• According to the procedures described in this operat-
ing instructions, please do not open by yourself. Any
break, please contact professionals, and must by the
professional and technical personnel for repair.
• Do not power in and open before installation. Let
have a rest when continuous work for eight hours. It
will longer the device using lift.
• Fixed installation, to prevent the strong vibration or
impact of the device.
• The distance between the device and the projectile to
keep at least 0.5 meter.
• Never look directly into the light source,as sensitive
persons may suffer an epileptic shock(especially
meant for epileptics)!
• When light output position of the device of dustproof
glass breakage, cracks or other visible damage, user
should replace the new glass to continue to use.
• The installation of the effect has to be built and con-
structed in a way that it can hold 10 times the weight
and without any harming deformation.
• The installation must always be secured with a sec-
ondary safety attachment, e.g. an appropriate safe-
ty rope.Never stand directly below the device when
mounting, removing or servicing the fixture.