NOTE: Please do not overload your dishwasher. There is only space for 12 standard dishes.
Do not use dish that is not suitable for dishwashers. This is important for good results and
for reasonable energy consumption.
Loading Cutlery and Dishes
Before loading the dishes, you should:
Remove large left-over
Soften remnants of burnt food in pans
When Loading the Dishes and Cutlery, Please Note:
Dishes and cutlery must not impede the rotation of the spray arms.
Load hollow items such as cups, glasses, pans etc. with the opening downwards so that
water cannot collect in the container or a deep base. Dishes and items of cutlery must not lie
inside one another, or cover each other
To avoid damage to glasses, they must not touch
Load large items which are most difficult to clean into the lower basket
The upper basket is designed to hold more delicate and lighter dishware such as glasses,
coffee and tea cups
Attention!
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in
the upperbasket
Damage to Glassware and other Dishes
Possible causes:
Type of glass or manufacturing process. Chemical composition of detergent.
Water temperature and duration of dishwasher programme.
Suggested remedy:
Use glassware or porcelain dishes that have been marked dishwasher-proof by the
manufacturer.
Use a mild detergent that is described as kind of dishes. If necessary, seek further
information from detergent manufacturers.
Select a programme with a low temperature.
To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after
the programme has ended.
At the End of the Wash
When the washing cycle finished, the buzzer of dishwasher will emit 6 short signals, and
then the status indicator flashes with low brightness.
1.Switch off the appliance via the ON/OFF button,
2.turn the water tap off.
3.Remove the dishes, etc. When they have cooled down.
English-17