Sunbeam Products Oster OS-BDW12SD Manual De Instrucciones página 57

Connecting the water inlet hose
Connecting the water outlet hose
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
• the socket is earthed and complies with current regulations;
• the socket can withstand the maximum load of the appliance, which is indicated on
the data plate located on the inside of the door(see description of the appliance);
• the power supply voltage falls within the values indicated on the data plate on the
inside of the door;
• the socket is compatible with the plug of the appliance. If this is not the case, ask an
authorised technician to replace the plug (see assistance); do not use extension
cables or multiple sockets.
For optional
mi n 4 0m m
English-24
Connect the cold water supply hose to a
threaded 3/4(inch) connector and make
sure that it is fastened tightly in place. If the
water pipes are new or have not been used
for an extended period of time, let the water
run to make sure that the water is clear and
free of impurities. If this precaution is not
taken, there is a risk that the water inlet can
get blocked and the appliance could be
damaged.
Fit the drainage hose of your machine to
the drainage pipe without bending.
If the length of the hose is not sufficient,
apply to the authorized service for an
extension made from the same material as
the original. Remember that the length of
the hose should not exceed 4meters even
when with an extension.
If the drainage hose is longer the 4 m. the
dishes will not be cleaned properly secure
your hose firmly to the drainage pipe to
avoid it coming off during the washing
process.