TESY HPWH 3.2 100 Manual Del Usuario página 3

EN
DOMESTIC HOT WATER HEAT PUMP
Dear Customer,
Thank you for having purchasing this product.
We, has always paid a great deal of attention to environmental problems, therefore, it has used technologies and materials with a
low environmental impact to manufacture its products in conformity with WEEE – RоHS (2011/65/ЕU and 2012/19/EU community
standards.
IMPORTANT! Non observance of below described rules leads to warranty fault and the producer bear no more responsi-
bilities for your appliance!
• This appliance is not intended for use by persons (including children) with re-
duced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appli-
ance.
• Children must not play with the equipment. Cleaning and maintenance intended
to be carried out by the user must not be performed by unsupervised children.
• The use of the appliance for any purpose other than that it is intended is prohib-
ited
• Do not use the storage tank if it is not filled with water.
• Installation, commissioning and maintenance of the device must be performed
by qualified and authorized personnel. Do not attempt to install the device yourself.
• The appliance must only be installed in premises with normal fire resistance.
• Usage of this device at temperature and pressure level above prescribed leads
to warranty violation!
• This device is intended for heating of potable water in liquid state. using differ-
ent fluids in different states leads to warranty violation!
• Read carefully the "Installation and maintenance manual", that is an integral part
of your appliance!
• Check if the unit is installed and connected according to the "Installation and
maintenance manual", that is an integral part of your appliance!
• Check if the tank is full with water!
• Check if the electric main supply is present an it is with accordance to the local
regulations!
• Check that the air ducts or air inlet/outlet are not blocked!
IMPORTANT RULES AND SAFETY INSTRUCTIONS
BEFORE STARTING THE UNIT!
3