TESY HPWH 3.2 100 Manual Del Usuario página 5

5- Press button again to transfer to timer off setting, the "timer off" icon
6- Press the and buttons to change the hour(s).
7- Press button button to transfer to minute setting, minute icon ":88" flash, press the
8- Press button to confirm. In this moment, "timer off" icon
IMPORTANT: If step No8 is omitted, timer off icon
9- Press button again to save and exit the timer setting interface.
IMPORTANT:
- If step No4 is omitted and all steps from 5 to 9 are done, "timer off" will be set and in stand by mode icon
- If step No8 is omitted, and all steps from 1 to 4 are done, "timer on" will be set and in stand by mode icon
- If all steps from 1 to 9 are done, both "timer on" and "timer off" will be set and icon
Timer cancelling:
Do all steps from 1 to 9, without steps No4 and No8. The timer will be cancelled
NOTE: 1) The timer settings are automatically repeating.
NOTE: 2) The timer settings are still valid after a sudden power cut.
4
1) Short press the button
• AUTO mode. (Heat pump + E-heater will work according to the controller logic). The symbol
• GREEN mode. (Only heat pump will work at normal working condition). The symbol
• BOOST mode (Heat pump + E-heater will work at the same time). The symbol
• E-HEATER mode. (Only E-heater will work). The symbol
•
VENTILATION mode. (Only fan will work). The symbol
2) Check the system parameters
• In any status, press this button
• Press the and
6
8
13
7
1 Hot water available
2 Fan ventilation
3 Electrical heating
4 Defrosting
5 "Green" mode
6 "AUTO" mode
1 1 1
will stay flashing and "timer off" is not set!
ON ON ON
2 2 2
and the working mode could be set.
and hold for 3 seconds, entry the system parameter checking interface.
buttons to check the system parameters.
MEANING OF LED ICONS!
4
SET SET
TEMP TEMP
The icon indicates that the domestic hot water temperature has reached the set point. The hot water
is available for use. Heat pump is in standby.
The icon indicates that the fan ventilation function is enabled.
The icon indicates that the electrical heating function is enabled. The electrical heater will work ac-
cording to the control program.
The icon indicates that the defrosting function is enabled. This is an automatic function; the system
will enter or exit the defrosting according to the internal control program
The icon indicates that the unit is operating in "Green" mode.
The icon indicates that the unit is operating in "AUTO" mode.
1 1 1
and hour icon "88:" flash simultaneously.
2 2 2
OFF OF OFF F
1 1 1
stops flashing that means "timer off" is set
2 2 2
OFF OFF F OF
1 1 1
2 2 2
will appear on the display.
will appear on the display.
2 5
OUT OUT
C C C C
1 1
ON ON
2 2
OFF OFF
10
5
and buttons to change the minute(s).
1 1 1
will light on display.
2 2 2
OF OFF F OFF
1 1 1
will light on display.
ON ON ON
2 2 2
ON ON ON will light on display.
OF OFF F OFF
will appear on the display.
will appear on the display.
+ will appear on the display.
1
3
9
11
12