Publicidad
3.Run water through both faucets and inlet hoses,into a bucket or laundry tub, to get rid of
particles in the water lines that might clog the inlet valves screens.
4.Attach the hose connected with the water faucet to the water inlet valve.(As figure 3)
Note: Do not overtighten. Damage to the valves can result.
5.Check for leaks
(1).Swing the water inlet hose gently to confirm if it's suitable.
(2).Turn on the water faucets and check for leaks.A small amount of water might
enter the washers.You will drain this later.
Preparation
Install the water inlet hose.
Insert the end of the drain
hose into the hook shelf, and
hang the drain hose over a
drain outlet.
Method
1.Power switch
Press the power switch to turn on the washing machine.
op e r a ti on
Turn on the tap
Before washing ,please take
out coins or other hard goods,
and pull to close the zip
fastener to prevent clothes and
barrel from damage.
English-6
Plug in the power cord.
6
Put suitable detergent and
wash load into the tub.
DETERGENT
Publicidad
