Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Installation Guide V1.0 -2022 -09-05
01
Safety Precautions
General Disclaimer
•
The information in this quick installation guide is subject to change due to product
updates or other reasons. All descriptions here are for guidance only.
•
Before installations, read through the quick installation guide.
•
All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
•
Check the deliverables for correct model, complete contents, and intact appearance.
Contact the manufacturer if any damage is found or any component is missing.
•
Strictly follow the installation, operation, and configuration instructions in this guide
and user manual. The manufacturer shall not be liable for equipment damage or
personal injury if you do not follow the instructions. For more warranty details, please
visit https://en.goodwe.com/warranty.
Safety Disclaimer
WARINING
•
Make sure that the device is powered off before any operations.
•
Ensure the cables are connected tightly, securely, and correctly. Inappropriate wiring may
cause poor contact or damage the device.
•
Additional circuit breakers are recommended on the voltage input side to avoid personal
injury or device damage.
•
Specification of the protective fuse should be 0.5A.
•
In areas at risk of lightning, if the device cable exceeds 10m and wired without grounded
metal conduits, you are recommended to use an external lightning protection device.
Check before Power-on
No.
The product is firmly installed at a clean place that is well-ventilated and easy-
1
to-operate.
The input power cables, CT Cables, and communication cables are connected
2
correctly and securely.
3
Cable ties are intact, routed properly and evenly.
Check Item
1
EN
Publicidad
