Product functions
EN
Intended use
This high pressure washer TTB2700PRW is designated with a rated input of
2700 Watts.
The intended use of this product covers the cleaning of vehicles, buildings,
terraces, facades and garden equipment using clean water and biodegradable
chemical detergents. Likewise you can remove sticky dirt, for example from
paving slabs or rain gutters.
This product must not be used to clean clothing, shoes and other textiles.
The water jet should not be directed against persons, animals, any electrical
equipment or on the product itself. Do not flush any objects which contain health
hazardous materials (e. g. asbestos). Do not run the product with inflammable,
explosive and toxic liquids.
For safety reasons it is essential to read the entire instruction manual before
first operation and to observe all the instructions therein.
Winging handle and hose reel
Use the winding handle to rotate the hose reel. The hose reel is used to store
the pressure hose.
1. Pull out the winding handle (4) from the housing and unfold it to unlock the
hose reel (2) and itself (Fig. 17).
2. Pull out the pressure hose (3) from the hose reel (2) for operation.
3. Turn the winding handle (4) clockwise to wind up the pressure hose (3) for
storage. Release the pressure in the hose before winding up the hose: turn
product off using the control dial and press gun trigger until the pressure is
released.
4. Align and insert the tongues (4a) of the winding handle with the grooves (4b)
to lock the hose reel and winding handle. Fold the winding handle afterwards.
NOTE: Always unwind the complete hose for operation to avoid
damage and injuries.
NOTE: Pull out the pressure hose (3) completely from the hose reel (2)
for operation.
24
96262_IM_TTB2700_4L.indb 24
96262_IM_TTB2700_4L.indb 24
3
2
4
4b 4a
Fig. 17
Fig. 16
TTB2700PRW byTITAN
2021/9/16 下午5:07
2021/9/16 下午5:07