fadini COMBI 787 Manual De Instrucciones página 15

COMBI 787
TECHNICAL SPECIFICATIONS
TWO-PHASE CLASS H ELECTRIC MOTOR
Power output
Absorbed power
Frequency
Supply voltage
Absorbed current
Capacitor
Motor rotation speed
Intermittent service
DOUBLE STROKE JACK AND OIL-HYDRAULIC PUMP
P3 - Hydraulic pump capacity
Working temperature
Oil type
Shaft rotation
Working torque
Piston diameter
Piston stroke
Weight with foundation box
Protection standard
Dimensions (LxWxH)
[A]: -40 °C with specific optional accessories (Ref. General Catalogue).
• With gate leaves wider than 2 m, an electric lock is also required.
Oil-hydraulic underground operator
for swinging gates
0,24 kW (0,33 HP)
330 W
50 Hz
230 Vac
1,8 A
12,5 μF
1.350 rpm
S3
0,85 l/1'
-20 °C +80 °C
[A]
Oil Fadini - Item 708L
110°
250-400 Nm
75 mm
52 mm
34 kg
IP 67
435x396x190 mm
435
406 mm
435
kg
MAX. GATE WIDTH PER LEAF (m)
The gate structure, design (solid, in-filled), height and strong wind pressure may
affect and decrease the indicated values. Make always sure the gate structure is
adequate to automation.
Via Mantova, 177/A - 37053 Cerea (VR) Italy
Ph. +39 0442 330422 Fax +39 0442 331054
info@fadini.net - www.fadini.net
PERFORMANCE
Frequency of use
Service cycle
Complete cycle time
Complete cycles
opening-dwell-closing-dwell
APPLICATIONS
Max. gate weight per leaf
Max. gate width per leaf
VERSIONS
- Braking in opening and closing
- Non braking
- Hydraulic bidirectional locking
- Non locking (reversible): an electric lock is to be fitted
- With flow regulator
60
76 276
396
15
very intensive
opening ~ 23 s
dwell 15 s
closing ~ 23 s
dwell 15 s
~ 76 s
No. 45/hour
1.000 kg
6 m
2012/19/UE Directive
GB
Re. disposal of electric
and electronic waste
DISPOSE PROPERLY OF MATERIALS
ARMFUL TO THE ENVIRONMENT