Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
1. Handle lock
2. Handle
3. Grill plate with non-stick coating
4. On/off indicator lights
5. Plate locking button
6. Power cord winder
OPERATION
Before the first use
Remove all the labels, stickers and tags,
except the plate of product characteristics.
Clean the appliance as described in the
Cleaning and Maintenance section.
Use
CAUTION: Do not use this appliance to
cook or defrost frozen food. All foods must
be completely thawed before cooking them
with this appliance.
NOTE - during the first minutes of operation
(only upon first use), the appliance may
release some smoke and odours, which
soon disappear.
Completely unwind the power cord.
Place the appliance on a flat horizontal
surface, ensuring that the power cord is not
stretched.
Use the plate locking device to lock and/or
unlock the plates.
Lightly brush the surface of the plates
with cooking oil. Close the appliance and
connect it to the plug.
Connect the power cord plug to the power
socket. If using an extension, make sure
that it is earthed and suitable for 6A. The
on/off indicator light should switch on,
indicating that the appliance is connected
to the power socket and heating up.
WARNING: The non-stick plates and
surfaces of the appliance may heat up
during its operation. To prevent risk of
burning, only touch the appliance using the
handle.
Allow the non-stick plates to preheat; the
on/off indicator light switches off.
Use the handle to raise the upper plate.
Place the food on the lower plate, if
necessary, using a heat resistant wooden or
plastic utensil.
CAUTION: Do not use metal utensils on the
non-stick plates, as they could damage the
non-stick coating irreparably.
Lower the upper plate using the handle.
While the appliance is being used, the
on/off indicator light switches off and on,
which is normal, indicating that the cooking
temperature is maintained.
To release the non-stick plates, slide the
locking button. To reinsert the plates, slot
the plates into the rear fixtures and press
next to the locking buttons until the plates
are fixed.
CLEANING AND MAINTENANCE
Turn off the appliance by removing the
power cord plug from the power socket and
allow it to cool.
When it is completely cold:
Remove the plates and wash them by
hand with hot water and a non-abrasive
detergent. Do not use abrasive utensils or
sponges, so as not to damage the non-stick
coating. If necessary, leave the plates to
soak for a few hours. Wash and clean with
a soft and dry cloth. Do not place the plates
in the washing-up machine.
English
11
Publicidad
