Gescasi remock CODE Guia De Inicio Rapido página 11

Remock Code is a wireless panel consisting of a fingerprint reader, 125 KHz proximity card
reader and touch keypad, fully compatible with Remock and Remock Pro invisible locks, and
the Remock Magic motorized cylinder. Installation can be done with either hardware or 3M
double-sided adhesive, both providing an easy way of installation. The rolling code encryption
algorithm and split design ensure enhanced security. The device can store 1000
fingerprint/PIN/user card. Due to the low power consumption, the batteries have a maximum
autonomy of approximately six months, based on 30 operations per day. It will warn of the
need to change batteries intelligently if the battery is low.
Common features:
• 1000 fingerprint/PIN/Card users.
• - 4 - 6 digits PIN, 125 KHz EM Card
• - 433 MHz Rolling Code technology
• - Communication distance: 30 m (Max.)
• - Ultra low power consumption
• - 3 pcs AAA batteries
INSTALLATION
Method 1: Double-sided 3M adhesive
The device kit includes a 3M double-sided adhesive that allows you to easily stick the device to a
smooth surface (adhesion will reach its optimum after 24 hours from installation).
Method 2: Screws
• Remove the rear cover
• Drill 2 holes (A, C) in the wall for the wall
plugs and another one (B) to pass the
cable through.
• Pass the cable through the hole in the
wall and fix the cover on the wall with
the 2 screws.
• Close the reader on its cover with the screw
located on the bottom side.
ENGLISH
Biometric keypad