Descargar Imprimir esta página

Dmx Linking; D-Fi Usb Connectivity - Chauvet DJ COLORBANDPIXMUSB Guía De Referencia Rápida

Ocultar thumbs Ver también para COLORBANDPIXMUSB:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 7
EN
Menu Map
Refer to the COLORband PiX-M USB V2 product page on
Mode
DMX Mode
Static Colors
Tilt Setting
Automatic Programs
Auto Speed
Sound-Active Mode
Sound Sensitivity
Custom Color Mixing
Infrared Mode
Dimmer Speed
Offset

DMX Linking

The COLORband PiX-M USB V2 can work with a DMX controller. Instructions for connecting and configuring this product
for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 477.
Master/Slave Connection
The COLORband PiX-M USB V2 uses the DMX data connection for its Master/Slave mode. Information about configuring
the COLORband PiX-M USB V2 for Master/Slave operation is in the User Manual, which is available from the Chauvet
website.
IRC-6 (Infrared Remote Control)
The COLORband PiX-M USB V2 can be operated with the CHAUVET IRC-6. For more information about the IRC-6,
download instructions for the IRC-6 or the COLORband PiX-M USB V2 User Manual from www.chauvetdj.com.

D-Fi USB Connectivity

The COLORband PiX-M USB V2 is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the
product's DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display control/menu
buttons and IRC-6 will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
Programming Levels
5Ch
6Ch
8Ch
10Ch
d 1–512
17Ch
32Ch
36Ch
C--
C 1–18
t--
t 0–100
P--
P 1–14
S--
S 1–100
Snd
Snd
SenS
u 0–100
r000–255
U--
g000–255
b000–255
ON
SET
OFF
OFF
dIM1
dIM
dIM2
dIM3
OFFS
0–255
www.chauvetdj.com
for the latest menu map.
Description
5-channel DMX mode
6-channel DMX mode
8-channel DMX mode
10-channel DMX mode
17-channel DMX mode
32-channel DMX mode
36-channel DMX mode
Static colors
Tilt setting (0–50 static, 51–100 auto slow to fast)
Automatic programs
Program speed for P 1–14
Sound-active programs
Sets sound sensitivity
Custom static colors
Combine red, green, and blue
Turns infrared on or off
Dimmer speed settings: off, fast, medium, or slow
Offset (calibration mode)
COLORband PiX-M USB V2 QRG Rev. 3

Publicidad

loading