Introduction; Intended Use; Features; Package Contents - Parkside PNS 300 B3 Traducción Del Manual De Instrucciones Original

2-SPEED DRILL / SCREWDRIVER
PNS 300 B3

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for screwing and
unscrewing screws and drilling into wood, metals
and plastics.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.

Features

Speed selector switch
Cover for carbon brushes
Rotation direction switch
Locking button
ON/OFF switch/speed control
Torque selection ring
Bit holder
Chuck ring
Chuck
Bits
■ 38 │ GB │ MT

Package contents

1 2-speed drill / screwdriver
2 bits (PZ2/PH2)
1 set of operating instructions

Technical data

Rated power
consumption
Rated voltage
Gearbox
Rated idle speed
Max. torque
Torque levels
Chuck capacity
Max. drill diameter
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Drilling in metal
Uncertainty
Wear hearing protection!
300 W
230 V ∼ 50 Hz (AC)
2-speed gearbox
1st gear n 0–400 rpm
0
2nd gear n 0–1600 rpm
0
40 Nm
1–22 + 1 drill setting
max. Ø 10 mm
25 mm for wood
10 mm for steel
II / (double insulation)
L = 80.5 dB (A)
PA
K = 5 dB
PA
L = 91.5 dB (A)
WA
K = 5 dB
WA
a = 3.834 m/s
h,D
K = 1.5 m/s
PNS 300 B3
2
2