Depstech DS300 Manual Del Usuario página 6

Single and Double-Lens Switching (only applicable to double-lens
products):
Long press the
and dual-lens.
Lens LED Brightness Adjustment:
Click the key to lower the brightness, and click the
increase the brightness.
Copy photo and video files to computer
The device does not support USB data cable to transfer data, you can
use a TF card reader to copy data directly.
Introduction to the Menu Interface:
Enter the MENU interface: Press
press /
option interface. Press
1. Resolution Setting: Enter the resolution interface, press
select the resolution, and then press
2. Language Setting: Enter the language setting interface, press
to select the language, and then press
3. Auto OFF Setting: Enter the Auto OFF setting interface, press
to select the time, and then press
4. TF Card Formatting: Enter the formatting interface, choose whether to
format, and then press
5. System Reset: Enter the System Reset Interface, choose whether to
restore the factory settings, and then press
6. Time Setting: Enter the time setting interface, press
year, month, day, minute and second to be adjusted, press
adjust the time, and press
7. Storage Space: Check the memory card capacity and the remaining
memory;
8. Software Version: Check the firmware version number of this product.
button to switch among main lens, auxiliary lens
to select options, and then press
again to exit.
to confirm;
to enter the menu interface,
to confirm;
to confirm;
to confirm;
to confirm;
to exit after setting;
04
key to
to enter the
/ to
/
/
to select the
/ to