2.1.2 Description of the menus
ICON
FUNCTION
Power
Fan
*(where featured)
Temperature
Fuel
Timer
ICON
FUNCTION
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
Setup
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[30]
[31]
[40]
[30]
[40]
Submenus
and
2.2 USING THE CONTROL PANEL
•
The arrow buttons
•
When selecting a given function, simply press the
buttons.
•
Pressing the
In general all values that are 昀氀ashing can be modi昀椀ed using the
•
•
The "cancel" button
alarm or error codes.
Stove output setting
It allows you to set the fan speed.
Displays the room temperature reading and is used to set the desired
temperature.
Not used
Enables or disables the timer. When enabled, the icon
displayed steady (not 昀氀ashing)
SUBMENU
Assigns the programs (max 3) to the di昀昀erent days of the
Weekly timer
week
Programs
Program setting menu
Time / date
Time and date setting
Displays the number of hours remaining until recommended
Hours remaining
maintenance. When "Hi" is displayed, the remaining time
exceeds 999 hours.
System
Displays the current software version
information
Function not enabled
Enables or disables Eco Mode, in which the stove
automatically switches o昀昀 and on based on room temperature
Eco function
(only in con昀椀guration 1).
Di昀昀erence in degrees from room temperature below which
Restart delta
the stove switches on again (only in con昀椀guration 1).
Frost protection
Minimum temperature below which the stove switches on
(only in con昀椀guration 1).
temperature
Lock keypad
Disables the buttons on the keypad
Display brightness Sets display brightness
Display mode
Sets how the data is displayed
Buzzer volume
Sets the buzzer volume
Three di昀昀erent types of combustion can be set
Combustion
Function not enabled
Installer menu
Sets/displays the stove con guration
Manual auger
Manual activation of the pellet load system
load
Service menu
Menu reserved for the service centre
in the Setup menu are password-protected and reserved for service centre personnel.
are used to scroll between the di昀昀erent menus that are highlighted.
button con昀椀rms the setting.
is used to cancel any changes; pressing and holding the button displays any active
004776500 - 11/12/2019
DESCRIPTION
DESCRIPTION
button and then modify the values, again using the
VALUES
1..5
OFF*,1..5; Auto; Hi
6°C .. 51°C
will be
ON - OFF
[d1] ... [d7]
[P1] ... [P6]
OFF; Eco
0,5 ... 5,0°C
OFF; 3 ... 20 °C
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
PWD: "54"
PWD: "54"
buttons.
VALUES
1 ... 3
19