Identification Of The Appliance - CAN FC Serie Manual De Instrucciones

IDENTIFICATION OF THE APPLIANCE

There is an identification label at the bottom of the appliance bearing:
▪
serial number information,
▪
typological/functional features,
▪
certification data and CE marking.
The CE marking certifies that the product meets
the requirements of EU regulation 2016/426 on
appliances burning gaseous fuels.
6
10
.
field
pos
MANUFACTURER
1
2 EC CERTIFICATE
3 DESCRIPTION
TYPE
4
5 MODEL
TOTAL POWER
6
7 TOTAL CONSUMPTION
GAS SUPPLY
8
COUNTRIES OF USE
9
ALLOWED CATEGORIES AND
10
PRESSURES
11 QR CODE
SERIAL NUMBER
12
PRODUCTION DATE
13
WARNING MESSAGE
14
15 OTHER INSTALLATION SITES
4 7 5 1 15 2
8 9
Field containing references to the manufacturer of the devices and to the
location of the production unit (insertion of references to the trademark or
logo of the manufacturer).
PIN – EC-certified number
Device description/nomenclature
Device serial number
Device model
Sum of the nominal power values of the burners installed (data expressed
in kW)
Maximum total gas consumption of the device (expressed in grams/hour)
Types of gas allowed to power on the device (references to EN 437 and EN
30-1-1)
Countries where it is possible to use a certain gas supply category/pressure
among the ones specified in the "CATEGORIES/PRESSURES" boxes
(references to EN 437 and EN 30-1-1)
Category and range of operating pressure values for the gases used to
supply the device (references to EN 437 and EN 30-1-1)
Unique Qr Code of the device
Unique device serial number
Device production date
Warning message for the installer and user of the product (references to EN
30-1-1)
Other allowed installation sites in addition to domestic environments
Installation, use and maintenance instruction manual
ATTENTION!
The identification plate must not be
removed.
3
13
12
11
description
▪
Ed. 10/2021 Rev. 03
14
115