Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
DOOR SENSOR
Place the neodym magnet on the moving top part of the door panel (Fig. 4). The external door sensor
should be placed on the fixed part of the lift door machine, as close to the neodym magnet as possible
when the doors are closed. Best placement depends on the door type, see Fig. 2 for reference. If the
neodym magnet and the external door sensor are placed too far apart the quality of the door opening data
cannot be guaranteed.
Connect the USB cable to the main unit (Fig. 3). The main unit and door sensor must be within 2 meters
of each other (the door sensor cable length is 2 meter, if longer cable is needed a standard USB extension
cable can be used).
One additional door sensor can be ordered. The second door sensor can be used when there are two door
openings.
MAIN UNIT
Mount the main unit on top of the lift car. Fasten the unit with two screws (Fig. 1).
Connect the USB charging cable to the unit and the wall charger and then connect the wall charger to a
power outlet (Fig. 3).
INSTALLATION
For the final part of the installation, please download the LYNX app from Google Play or Apple App Store.
Fig. 1
Fig. 3
230 VAC
Fig. 4
B
A
www.imsyst.com
14
Publicidad
