Descargar Imprimir esta página

Oil Filter Cleaning; Throttle Cable Adjustment; Clutch Cable Adjustment; Reverse Cable Adjustment - Vito Agro VIMEDTD12A Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Always place the filter elements in the original
positions.

Oil filter cleaning

1. Remove the fender guard;
2. Unscrew the fixing bolt on the oil filter cover;
3. Remove the oil filter and blow out with compressed
air until it is completely clean;
4. Place the clean filter and tighten the bolt.

Throttle cable adjustment

1. Unscrew the throttle cable bolt;
2. Adjust the throttle cable tension;
3. Tighten the throttle cable fixing bolt while holding
the cable in the desired adjustment position.

Clutch cable adjustment

There are 2 clutch adjustment bolts. The bolt attached
to the clutch lever (12) and the bolt attached to the
clutch handle.

Reverse cable adjustment

If reverse cable adjustment is required, use the bolt
coupled to the reverse gear lever.

Safety lever adjustment

1. Unscrew the safety lever cable fixing bolt;
2. Adjust the safety lever cable tension;
3. Tighten the safety cable fixing bolt while holding the
cable in the desired adjustment position.

Storage and cleaning

Cleaning
Clean the machine thoroughly after each use. Careful
handling protects the diesel tiller and extends its service
life.
Allow the appliance to cool down completely before
cleaning.
Storage
Never store the equipment with diesel in the tank.
Depending on the region and storage conditions, diesel
can deteriorate and oxidize, causing damages in the
carburetor and fuel system, difficult starts and clogging
caused by particle accumulation.
If you have stored the machine with diesel on the tank,
to avoid difficult start-ups, please follow the
recommendations below considering the previous
storage period:
Less than 1 month:
▪ Follow the usual procedure.
1 month to 1 year:
▪ Drain all diesel from the fuel tank;
▪ Run the engine until it stops due to lack of fuel.
Over 1 year:
▪ Drain all diesel from the fuel tank;
▪ Run the engine until it stops due to lack of fuel;
▪ Change the oil.

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment in your
household waste!
Waste such as used oil, fuel, lubricant, filters and
wearing parts can harm humans, animals and the
environment and as such must be properly disposed of.
Make sure that the deactivated tiller is forwarded for
disposal in a technically correct way.
You can obtain information regarding the disposal of
the appliance and used oil from the legal responsible for
recycling in your city.

CUSTOMER SERVICE

Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
47

Publicidad

loading