JBM 53970 Manual De Instrucciones página 8

Battery level
k
indicator
Operation
l
light
Overload
m
indicator
Indicadores
n
de función
CHARGING PORTS DESCRIPTION
Input
No Name
Charging input
P1
port
Shows the charge
level of the battery
In charge mode, the
light blinks
In discharge mode,
the light is fixed.
Shows that there
is an overload
problem
If it is a problema in
the direct current
output, it will display
If it is a problema
in the alternating
current output, it will
display
Function no availa-
ble in this model
Function no availa-
ble in this model
Alternating current
output
It will display the
frequency (50 or
60Hz).
Direct current output
12V port, direct
current
USB-A port
USB-C port
Cigarette plug, 12V
Function/specifications
Connect the charger
Output
No Name
P2 USB Type-A
P3 USB QC
P4 USB Type-C
12V Cigarette
P5
plug
P6 12V DC port
P7 AC socket
P8 AC socket
K1 DC button
K3 AC button
Light
No Name
P9 Lighting
K2 LED button
ASSEMBLY
Connect the solar controller to the solar power generator
input After this, connect the opposite end of the solar
controller to the solar panels (not included)
· 8 ·
REF. 53970
Function
DC 5V 2.4A (x2)
DC 3.6V~20V 3.3A (Max.
65W)
DC 20V 5A PD 100W
DC 12V 10A
DC 12V 10A (x2)
AC 220V (Max. 3000W)
AC 220V (Max. 3000W)
Turn on/off the direct current
power
Turn on/off the alternating
current power To change
the frequency (50/60Hz),
keep the button pressed for
5 seconds
Function
On/Flashing/Off
Turn on/off the light
.