Descargar Imprimir esta página

Preparation; Parts And Hardware; Installation And Assembly - VENTE-UNIQUE BEF-40WMC Manual De Usuario

Chimenea eléctrica de panel curvado

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Preparation

This product includes a GLASS panel! Always use extreme caution when handling glass. Failure to
do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts and assembly
steps are grouped for wall-hanging or recessing use. Check the parts list to make sure nothing is missing. Dispose
of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape measure; electric
drill; 1/4" wood drill bit, hammer.

3. Parts and Hardware

A – Fireplace
E - Wall Bracket
Fixed on back of firebox

4. Installation and Assembly

Your appliance is a wall-mounted appliance. Select a suitable location that is not susceptible to moisture and is
away from drapes, furniture and high traffic areas.
NOTE: Follow all National and local electrical codes.
MINIMUM CLEARANCE TO COMBUSTIBLES
Bottom
Sides
Back
Measurements are taken from the glass front.
0"
0"
0"
B – Wood Screws
Remote Control
Top
Top
12
C – Drywall anchors
Instruction Manual
39.4" (1000mm) to mantel
39.4" (1000mm) to
ceiling

Publicidad

loading

Este manual también es adecuado para:

Flamatech nevado